EVOMINI IOIT

IOIT - Rev. 0

EVOMINI IOIT

Temperature transmitter with IO-Link interface and integrated thermocouple probe in mineral-insulated cable (MgO)

Can be configured in three operating modes: IO-Link, 4-20mA loop powered and switching output with alarm thresholds (SIO). Moulded body with M12 output connector and IP67 protection degree. Very good alternative to traditional thermometric assemblies with connection head. Available different type of process connections.

Technical specifications

Downloads

Media

Need Help?

Sales Team

enquiry@italcoppie.com

+39 0372 441220

We will get back to you within 2 business days

Technical specifications

Electrical technical data for thermocouple Evomini IO-Link devices

Ambient temperature

-40 ÷70°C

Storage temperature

-40 ÷70°C

Operating humidity

0 ÷100%

Operating Voltage

18÷30 Vdc reverse polarity protection (IO-Link operating mode)

8÷32 Vdc reverse polarity protection (Loop Powered operating mode)

Current consumption

0.65 W (IO-Link operating mode) 0.8 W (SIO operating mode)

Input/Output insulation

None

Sensor input signal filter (*)

(*) time to reach 90% of signal

Configurable from 0.1s to 3.7s

Output signal type

Configurable between: 4÷20mA analogue signal; IO-Link; switching PNP or NPN output (SIO);

Permitted load

727Ω @ 24 Vdc [Rload= (Vpw. - 8) / 0,022] (Loop Powered operating mode)

Sensor break or short-circuit monitoring

In accordance with NAMUR NE43, selectable between:

Upper scale (≥ 21.0 mA)

Lower scale (≤ 3,6 mA)

(Loop Powered operating mode )

Communication interface

IO-Link Vers. 1.1 (COM2 - 38,4Kbaud)

M12x1 - 4 pos. A-coded

IO-Link Smart Sensor Profile (2nd ed.)

In accordance with SSP type 3.1

Switching output (*)

(*) SIO operating mode

NO/NC programmable, PNP/NPN

Overload and short circuit protection

Hysteresis or window function

Programmable output activation/deactivation delay

RGB LED for output status signaling (configurable color for OFF state and ON state)

Maximum current: 250mA

Display elements (*)

(*) IO-Link operating mode

Green color LED (IO-Link), RGB LED with configurable color (Locator), RGB LED with configurable color (SIO)

Temperature influence (*)

(*) deviation from 20°C

Maximum value between ±0,3°C/25°C and ±0,3% of span/25°C (Loop powered operating mode)

±0,3°C/25°C in the range 200...1000°C (IO-Link and SIO operating mode)

Long-term stability

Maximum 0.1% of span per year

Linear error

Negligible

Sensor error compensation

Offset or over two points

EMC

In accordance with EN 61326-1 (CE)

In accordance with BS EN 61326-1 (UKCA)

Cold junction accuracy

±0,1°C + error of Pt1000 class A

Measurement range

-270 ÷ 1300°C

Accuracy @25°C for IO-Link modality (*)

(*) Without cold junction and sensor error (thermocouple K class 2)

±1.0°C

Accuracy @25°C for Loop Powered modality (*)

(*) Without cold junction and sensor error (thermocouple K class 2)

Maximum value between ±1.0°C and ±0.2% of span

Minimum span of signal retransmission (*)

(*) Loop Powered operating mode

50°C

Connection body material

THERMOPLASTIC

Type of connector

Male 4-pin connector with M12x1 metal screw lock (in accordance with IEC 61076-2-101 STANDARDS)

Stem length L

250 mm

500 mm

1000 mm

1500 mm

Other lengths on request

Sensor construction type

With mineral compact insulation (M.I.C.)

Dimensional notes

Lengths other than those listed can be produced for minimum quantities to be agreed (after our feasibility study)

Sheet material

AISI 316L

Sheath diameter d

Ø 3 mm

Ø 6 mm

M.I.C. min. bending radius

3 times the outer diameter (except the sensing tip which length is ~30 mm)

Fixing system

Bare stem

Response time (*)

(*) test in water in accordance with IEC 751. Time taken to reach 63.2% of temperature step

Less than 3.5 seconds for Ø 3 mm and less than 13 seconds for diameter Ø 6 mm

International protection marking (*)

(*) According to IEC 60529

IP67

Programming

With any IO-Link programmation platform and the relative master.

Option

On request adjustment on 1 or 2 points

Factory default

Loop powered operating mode: (4÷20)mA output / Range 0÷1000°C / Sensor break ≥21mA / Sensor short-circuit ≤3.6mA

Switching output operating mode (SIO): PNP type output with hysteresis function NO, SP=800°C, RSP=700°C, no delay, output status signaling: LED color red

Downloads

Data sheet

ic_datasheet_ioit_en.pdf[4,79 MB]

Drawings

Mechanicla dimensions[1,39 MB]
Pin-out power supply connector R1[39,28 KB]

Media