Technical Specifications
Electrical technical data
Power supply
10 ÷28 Vcc (polarity protected)
Accuracy (*)
(*) @25°C
≤ ±0.3°C
Temperature influence (*)
(*) deviation from 20°C
Maximum value between ±0,3°C/25°C and ±0,3% of span/25°C
Permitted load
636 Ω @ 24 Vdc [RLΩ= (Vsupply - 10) / 0,022]
Sensor failure signalling
upper scale (> 21.0 mA)
downscale (< 3.6 mA)
Sensor short circuit signalling
Fixed at lower limit of range (< 3.6 mA)
Effect of power supply
Negligible
Electronic board operating temperature
-40 ÷80°C
Sensing element operating temperature range
-50 ÷500°C
Output signal type
4÷20 mA
Sensing element
Pt1000 Ω @ 0°C
Accuracy class in accordance to IEC751 (*)
(*) The accuracy class is valid only in the temperature range indicated by the norm
cl. A
Sheath diameter d
Ø 3 mm
Ø 6 mm
M.I.C. min. bending radius
3 times the outer diameter (except the sensing tip which length is ~30 mm)
Sheet material
AISI 316
Insulation resistance
100 M Ω@ 100 Vdc.
Realizable sheat lenghts L= (subject to feasibility check)
50 mm ÷10 m
Type of connector
male 4-pin connector with M12x1 metal screw lock (in accordance with IEC 61076-2-101 STANDARDS)
Connection body material
THERMOPLASTIC
Marking
Stating production batch, pin-out and power supply range
International protection marking (*)
(*) According to IEC 60529
IP65/67
Factory default
ranges available:
0 ÷ 100 °C
0 ÷ 150 °C
0 ÷ 300 °C
-50 ÷ 100 °C
-50 ÷ 150 °C
-50 ÷ 50 °C
Other configurations on request
FCM Features (Food Contact Materials) -40÷150°C
FCM Prescriptions
Before the use is required to wash the food contact areas
Contact food type
all the foods
Materials in contact with food
AISI 316L
Type of contact
continuous
Area suitable for contact
stem for a maximum length of 1 m (measured from the tip)
Contact food temperature range
-40 ÷150°C
