EVOMINI MIC

EVOMINIatMIC - Rev. 3

EVOMINI MIC

4÷20 mA temperature transmitter

This device can be a reliable alternative to common assemblies with connection head. Then moulded connector allow easy installation.

Technical specifications

Downloads

Media

Need Help?

Sales Team

enquiry@italcoppie.com

+39 0372 441220

We will get back to you within 2 business days

Technical specifications

Electrical technical data

Power supply

10 ÷28 Vcc (polarity protected)

Accuracy (*)

(*) @25°C

≤ ±0.3°C

Response time of electronics section

<50 ms

Temperature influence (*)

(*) deviation from 20°C

Maximum value between ±0,3°C/25°C and ±0,3% of span/25°C

Permitted load

636 Ω @ 24 Vdc [RLΩ= (Vsupply - 10) / 0,022]

Output signal type

4÷20 mA

Sensor failure signalling

Upper scale (> 21.0 mA)

Downscale (< 3.6 mA)

Sensor short circuit signalling

Fixed at lower limit of range (< 3.6 mA)

Effect of power supply

Negligible

Ambient temperature

-40 ÷80°C

EMC

In accordance with EN 61326-1 (CE)

In accordance with BS EN 61326-1 (UKCA)

Measurement range

-50 ÷350°C

Connection body material

THERMOPLASTIC

Type of connector

Male 4-pin connector with M12x1 metal screw lock (in accordance with IEC 61076-2-101 STANDARDS)

Sensor construction type

With mineral compact insulation (M.I.C.)

Stem length L

150 mm

250 mm

350 mm

Other lengths on request

Dimensional notes

Lengths other than those listed can be produced for minimum quantities to be agreed (after our feasibility study)

Sheath diameter d

Ø 3 mm

Ø 3.17 mm

Ø 6 mm

Ø 6.35 mm

Sensor protection

Metal sheath

Sheet material

AISI 316

Type of sensor

Thermoresistance

Sensing element

Pt1000 Ω @ 0°C

Accuracy class in accordance to IEC751 (*)

(*) The accuracy class is valid only in the temperature range indicated by the norm

Cl. A

Response time (*)

(*) test in water in accordance with IEC 751. Time taken to reach 63.2% of temperature step

Less than 3.5 seconds for Ø 3 mm and less than 13 seconds for diameter Ø 6 mm

Insulation resistance

100 M Ω@ 100 Vdc.

M.I.C. min. bending radius

3 times the outer diameter (except the sensing tip which length is ~30 mm)

Fixing system

Bare stem

International protection marking (*)

(*) According to IEC 60529

IP65/67

Factory default

Ranges available:

0 ÷ 100 °C

0 ÷ 150 °C

0 ÷ 300 °C

-50 ÷ 100 °C

-50 ÷ 150 °C

-50 ÷ 50 °C

Other configurations on request

Marking

Stating production batch, pin-out and power supply range

FCM Features (Food Contact Materials) -40÷150°C

FCM Prescriptions

Before the use is required to wash the food contact areas

Contact food type

All the foods

Materials in contact with food

AISI 316L

Type of contact with food

Continuous

Area suitable for contact with food

Stem for a maximum length of 1 m (measured from the tip)

Contact food temperature range

-40 ÷150°C

Downloads

Drawings

Output connection[104,66 KB]

Media

EVOMINIatMIC - Rev. 3

Data sheet

Certifications

Catalogs

Drawings